FAQ-Smart LED Bulbs

1. Smart Device WiFi Connection

Q1: How to connect your device?

A1: Step One - Add device

(1) Power on your device

(2) Log in your App, tap"+" on top right corner to add device

(3) Pair your device to the App


Ensure that the indicator light on the device blinking rapidly (twicea second) is in Configuration Mode which allows you to connect.

 - Please refer to the operation instructions at the top of the"Confirm indicator blink rapidly" button about "How to make indicatorblink rapidly".

 - Please press power button for 5 seconds to reset the device if the product doesn’t have a reset button.

 - For the lighting devices, please press the switch 3 times(on-off-on-off-on) till the device powers on and the light blinksrapidly.

 - If product has a reset button, please press the reset button directly.

 - It is recommended to check the operation manual in order to connect the device to WiFi more quickly.


Step Two - Enter Wi-Fi password

Enter the password of the WiFi Router your smart phone is connectedto. Click "Confirm" button to activate the connecting process. Wait afew seconds till the connection completes successfully.


** Note: Now only 2.4G Wi-Fi channel is supported. Please check whether your Wi-Fi network is 2.4G or not.


2. Wi-Fi Connection Failure

Q2: Failure to add device during WiFi Connection process.

A2: When adding device, please

 (1) Confirm that the device is powered on

 (2) Confirm that the device is waiting for network configuration

(3) Confirm that the device, smart phone and router are close to each other

(4) Confirm that both router network and smart phone function well

(5) Confirm that the router password entered is correct

(6) Confirm that the device being added is under 2.4 WiFi channel. Enable the broadcast and do not allow to hide Wi-Fi

(7) Confirm that the router’s encryption method is WPA2-PSK and theauthentication type is AES, or both are set up as automatic

(8) Confirm your Wi-Fi name only contains letters and number,g.:abcd1234

(9) If the amount of your router’s connected devices reaches thelimit, please try to turn off some device's Wi-Fi connection and connectagain

(10) If the router enables MAC address filter, please try to removethedevice from MAC filter list and make sure the router allows thedevice tobe connected

Q3: Failure to connect your devices to ‘SmartLife-xxxx’.

A3: If you can not connect your devices to ‘SmartLife-xxxx’; please try ‘undefined-xxxx’ from the WiFi list.

Q4: Device goes offline.

A4: When the device is offline, please

(1) Ensure that the device is powered on

(2) Check if the network is stable. ( How to check the network?Place a smart phone or iPad besides the device and make sure they are inthe same WiFi network environment, then try to open a website to judgeif the network works smoothly. )

(3) Confirm if the WiFi network works well, or whether the Wi-Finame and password have been modified or not. If so, remove the deviceand add it again. (How to remove the device? Open the App and enter thedevice control page, click "..." button which is on the top rightcorner, click "remove device" button on the bottom of the page. )

(4) Try to restart the router, wait 3 minutes and observe the status of the device

3. App Failure

Q5: Unable to control the device remotely by the App. Or unable to control the device by the App.

A5: It might be due to bad network environment or the device is offline.

(1) Ensure device is powered on

(2) It is recommended that you keep the App open for about 3 minutes, and observe whether the device is still online

(3) If it’s still online, please place a smart phone besides yourdevice and make sure they are in the same network environment, try toopen a website to check if it’s the problem of the network

(4) If the device is online and the network works well, but stillyou can’t control device. Please go to the device control page, click onthe "..." button on the top right corner, and then click "SendFeedback" button to report the problem that you encountered, and provideyou Router model, we will handle it ASAP

(5) After the device is connected, it can be remotely controlled bythe App. But if the device is relocated to another place under different WiFi network, the App is no longer able to control the device unlessreconnecting to the device via the new WiFi network

Q6: After the device is connected, it can be controlled atthe same location, but can't be remotely controlled by smart phone whenyou go to another location or use other network environment.

A6: If the device encounters such a situation, itmay be the reason that the device and smart phone are connected to thesame LAN, but not connected to the Internet.- Please place the phone besides your device and make sure they arein the same network environment, try to open a website to see if it’sthe problem of network.

- If you cannot access the network, it is recommended to restart the router.

- If the above problem still occurs, please go to the control pageof the device, click on the "..." button in the top right corner, andthen click on the "Send Feedback" to report the problem you encountered,and provide you Router model, we will handle it ASAP.

Q7: Device status cannot be synchronized with the status displayed on the App.

A7: If the device is controlled by a manual switchat the same time, the device may not be synchronized. It is recommendedthat you can try to open the App and control the device again to see ifthe device status is updated.

Q8: The lamp is off before power cut, but suddenly turns on after power recover.

A8: This usually happens when the lamp does not havea power button (also not controlled by a smart switch and no scenelinkage). If the device needs to be connected to the Internet, it isnecessary to ensure that the physical switch of the lamp is turned on,so that the lamp can be controlled by the App. When there is power cut,the smart lamp loses its connection to the App, and becomes an ordinarylamp. Then when the power recovers, the lamp turns on automatically asthe physical switch of the lamp is turned on before.

4. Compatibility with Third-Party Platforms

Q9: How to check if my device is compatible with the third party ?

A9: Please add your device to the App and enter thedevice control page, select "..." button on the top right corner, youwill see "Supported Third-party Control", click the icon to find themanual to use the third party control.

Q10: My device is successfully connected to Smart Life App, but fails to connect to Amazon Alexa or Google Assistant?

A10: When this happens, please

(1) Make sure ‘Smart Life’ skill is added to the Alexa App or Google Assistant App

(2) Make sure the account used in Smart Life App is the same as theone in Amazon App or Google Assistant App, and confirm that the accounthas successfully signed in the Apps

(3) Try to name your lighting devices with simple words in case thatAlexa or Google Assistant might hard to recognize complicated names

(4) Make sure both the lighting device and voice control device(Amazon Echo / Google Home) are connected to the same WiFi network. Ifthey use different routers, Echo or Google Home might not be able todiscover the lighting device

(5) If Amazon Cloud Service or Google Cloud Service breaks down, itwould result in network disconnection with lighting devices. In thiscase, please wait and try to reconnect the devices later

Q11: My device has been successfully connected to the thirdparty App (Alexa or Google Assistant), but fails to respond or respondvery slowly to its voice commands?

A11: When this happens, please

(1) Check your WiFi status and make sure it works well. Also make sure the lighting device is placed near to the router

(2) There is a limit for devices connected to one router (Maximumaround 16-32 devices). Too many devices(smart phone, TV, iPad, smartplug, smart switch, smart lights etc) would slow down or even break downthe WiFi network, causing the problems of slow response ordisconnection

(3) Try to name your lighting devices with simple words in case thatit may take time for Alexa or Google Assistant to recognize and respondto complicated names

(4) Both Smart Life App or the third party Apps (Amazon Echo /Google Home) use cloud services to process information. Temporaryservice breakdown may happen during the routine maintenance and updateof these Apps, causing dysfunction of the smart lighting devices. Whenthis case happens, please wait and try to reconnect the devices later,or contact us ( shop@novostella.net ), we will offer solutions accordingly

5. App Usage

Q12: How to cancel the countdown?

A12: Please set the countdown timer at 0 hours and 0 minutes to cancel it.

Q13: How do I switch between Celsius and Fahrenheit ?

A13: Please enter the App – "Profile ", click theavatar icon into the basic information page, choose the unit you need atthe "temperature unit". After revision, the scenes related totemperature will perform in the unit of your choice.

Q14: What is local scene?

A14: ZigBee Scene Switch uses special mode fordevice connection, it enables creation of local scene that works evenwhen the device goes offline. But only ZigBee devices under the samegateway can be added.

Q15: How to group the lights?

A15: Go to the function page of any of the lightingdevices that you want to group on Smart Life App, tap top right corner"..." button to enter next page, then click ‘Create Group’ button togroup the lights.

Nicht genügend Artikel verfügbar. Nur noch [max] übrig.
Zur Wunschliste hinzufügenWunschliste durchsuchenVon der Wunschliste entfernen

Ihr Warenkorb ist leer.

Return To Shop

Bestellhinweis hinzufügen Bestellhinweis bearbeiten
Versand schätzen
Fügen Sie einen Gutschein hinzu

Versand schätzen

Fügen Sie einen Gutschein hinzu

Der Gutscheincode funktioniert auf der Checkout-Seite